When getting into construction project, it’s important to draw outline for the project. Unexpected events like finance, construction permission, changes in design can cause construction project to be delayed. There are several reasons where construction schedule can save you from a lot trouble such as
When you want to buy a house, you should definitely think about a home inspection. You would not usually notice defects even when in plain sight, or details like what’s underneath the carpet or behind the walls; there may be flooring or structural defect. During inspection if you see too many red flags, it might be a better idea scratch that house from your list, consulting with a professional home inspector might be good idea but initial inspection on your own can reveal many thing if done properly. Categorize your visit into following.
This is the most important aspect of any house. Suppose a house is renovated but its structure is weak. In case of any natural catastrophe even if one wall is damaged, not only you will have to bear renovation expenditures but there will huge reconstruction bill, be sure to focus on strength of walls. What type of flooring is used? What was used in foundation? What type soil is there? Is this custom home build?
Impressions matter. Everyone will make their mind about the house at the first glance. Exterior will give an idea about the type of house will it be from inside. It is always a good idea to check for elevation, landscape, garage, fences, walls, drainage, door and window quality.
Roof and Attic:
You can check roof for signs of leakage, especially where there is fresh coating of color! You should also check if there is adequate ventilation in to the house. Time your visit in a way that you can also see presence of natural light.
What sort of plumbing is used, is there any corrosion on pipes or PVC is used. If corrosion is found on pipes, it will not only destroy piping but will also increase costs in terms of extra repairs. What material is used for potable, vent pipes? Check drainage condition, is there any blockage. Also check if toilets, sink and showers are working fine.
Check of electrical wiring, which can be a bit difficult but Main panel and circuit breakers can be examined to evaluate the quality of electrical installations, availability of exhaust, ceiling and light fixtures.
If there is basement you can check for adequate insulation, electrical wiring quality, availability of light. Incase appliances such as dishwasher, fridge or stove will also be given then in what condition they are? How old they are? Sometimes people have custom home built so checking everything becomes a necessity.
Gone are the days when people used to have simple construction needs. Now everyone wants extravagant designs as well as construction. The construction material is getting more expensive by the day and so is the labor. Still there are ways to control construction costs, which we will discuss in this article.
Even though it is not entirely possible to predict what exactly the cost of construction will be but there are ways to get your dream house without spending all your savings.
Don’t skimp on architects. One of the most important stages of construction is the initial phase when everything is being written down and drawn. This is the phase where almost all the expenses can be foreseen if not all. If the design is poorly drawn it will result in unexpected cost and expenses. If you want a strong building, you have to have a strong foundation. Same is the case with construction. In this, planning and drawing is the foundation for a stable and economical construction. Take it from us…pay reputable architects well, rather than finding an obscure one that may seem like bargain.
List your needs, list your wants. With endless possibilities for constructions nowadays it has become easier to get lost in the glitter and glamor of what more you can have in your construction dreams. This leads to a rise in expenses as well as takes the mind away from what is necessary. To make sure that nothing distracts you from your dream house make a list of what you need in your construction, without which you cannot image the building and what you want.
Plan in advance. It gets tougher to get the best price if not planned properly. During construction it can get easy to get excited by the endless possibilities but it is one of the reasons for increase in construction cost. It is important to stick to your budget and the best way to do this is to plan everything before execution. The things you’ll need and the place where they offer the best price for it. Anticipating any changes that you might encounter during construction is also essential for reducing construction cost.
Pick good-value materials. Reducing construction cost doesn’t have to come with poor and cheap construction materials and supplies. There are multiple variety of everything on the market, from carpets and countertops to cement and other materials. It is essential for construction companies to maintain a standard quality of materials they use. The way to keep the balance is the pick such materials that will last the longest, and do so for the minimal amount of money.
Centuries ago early humans took advantage of things like facing their homes to the south, using locally available materials, building where the natural resources they needed were close by, and living where they worked.
When the industrial revolution demanded that people go to a central location to perform their work a lot of this wisdom was lost. The growing adoption of oil as a fuel used in transportation caused masses of people from rural to shift to the cities to be near to their work places.
Since people had to now use transportation for moving around each day to get to their work places, now homes also had to be made near the city and city planning was in need. Thus came the start of row housing and sprawling suburbs. Therefore a lot of construction started going on in the cities where the main focus was on constructing on time and not on the environmental or human hazards it can cause.
Although US is recognizing the energy it is wasting on commuting, that could have been spent in increasing productivity. Not only a person’s energy but also electricity and other power sources to run offices and buildings.
As now as the paradigm changes, fewer and fewer people need to go to a place to work. Work-at-home is more encouraged and most of the tasks can be done from home. Seventy percent of the electricity generated in the country goes to power our homes, offices and factories. And the energy consumption grows every day and every year it damages our earth and our environment a little more.
So there is a major effort underway to quantify and qualify just what green building means.
But at some point out, establishing standards may lead to restricting invention in the construction industry, especially if those standards end up earning points toward some kind of certification, as happens with LEED(Leadership in Energy and Environmental Design).
In this article Architect Les Wallach FAIA founder of Line and Space in Tucson, AZ, points out that green standards can end up forcing the adoption of only those practices in building that are sanctioned by the standards. He questions then how new and more innovative practices could gain any base.
“A code is supposed to be a minimum standard — that’s what I have to do and not one thing more,” he says in the article. “If you get a point for using a carpet that has a high content of recycled bottles in it — great. But what if you use no carpet? Isn’t that even better? You get no points for it.”
These certifications should also include a post-construction analysis a year or more to compare it with the building plans to oversee what outcomes has it given to provide a greener environment. Thus after testing buildings we can project the new innovations made in that building, to establish which new innovation helped it becoming a better greener building.
Plus, one would assume that a LEED certified building built in 2007 would in some ways be greener than one built in 2004 simply because you have to assume that technologies and practices would improve over time. Therefore, the baseline building becomes the most recent state-of-the-art building and the challenge is to best it and not just check items off on the standards checklist.
The trick is to help people understand going into a project that if something doesn’t really end up helping the building become greener then, that’s just the way it is. Post construction verification will help us highlight areas where established standards aren’t really providing what is being anticipated.
As the economy improves, so is the construction industry. The industry is not just looking for the new structures and design but also for the strategies which will help in making the processes efficient and effective.
Construction business is ever changing as new methods of construction and new building materials are introduced. In this article we take a look at some of the latest trends seen in the market:
Traditionally what used to happen was a step by step process in which engineering documents were created then were given to the contractor to re-draw with modification. It was a time consuming process which involved a lot of back and forth communication between the engineers and contractors. To save time and money, a new trend has been introduced to make this process faster. This new trend is called the single-model design in which, through proper coordination, a design model goes from engineering right into construction. Due to this streamlined process, a project that used to take forty months to complete can be completed within thirty or even twenty-five months.
Recycled Building Materials
Materials play a huge role in the quality of the building but it’s not just the materials that are important. It’s the way they are used that makes the difference. China has produced 10 3D-printed buildings in 24 hours from recycled waste and cement. The walls are 3D- printed but the roof is not. The company said that the roof will not be able to be printed until the technology becomes more advanced. The upcoming trend is using recycled waste to ensure efficient energy consumption.
Furthermore, another aspect that should to be kept in mind while construction is energy consumption. Environmentally sustainable features are viewed as fundamental stakes for owners and buyers. Construction Company’s emphasis on using green building materials to build a more environment friendly building is considered as a huge core competency in the market.
Permanent Modular Construction
Another upcoming trend is the permanent modular construction which can easily last more than 50 years. This is a way of changing people mind as how they view buildings. It provides an innovative solution to logistic trials confronted during on-site construction. Permanent Modular Construction identifies elements of construction which can be classified as a various modules of different sizes. The main idea of this is to change people opinion. People view it as boxes whereas it’s not. It can be anything you image it to be. The possibilities when it comes to permanent modular construction are endless.
Bigger the better
In the past we have seen small scale projects ruling the construction industry. Since the economy took a hit so did the extensive buildings and their market. It was a time of small and simple designed construction sites but as the economy is rising with a bang so is the huge buildings trend. The market is seeing a huge change in the demand of buildings where once small buildings were the wiser choice and now large construction projects are making a comeback and sidelining the small projects. A lot of large projects are pipelined for 2014.